Cube L4-1.8L (MR18DE) (2010)
26. Remove the passenger side curtain air bag module as follows:
a. Release 2 antenna harness clips from the module.
a. Disconnect electrical connector.
C. Remove 12 bolts.
27. Carefully open the box and remove the new side curtain air bag module.
^ The original box for the new side curtain air bag is needed to ship the old air bag back to NNA.
^ The box must be in "Like New" condition for return shipment.
^ Any damage to the box will make it unusable.
28. Install the new side curtain air bag module into the vehicle as follows:
a. Install the 12 bolts and torque in the order shown in Figure 25. Bolt torque - 10.8 Nm (1.1 k-gm, 8 ft-lb).