Cube L4-1.8L (MR18DE) (2010)
SEAT BELT RETRACTOR : Removal and Installation
REMOVAL
OUTER SEAT BELT RETRACTOR
1. Remove the outer anchor.
-
Slide the rear seat assembly to front most position.
-
Remove the outer anchor fixing anchor bolt.
2. Remove the shoulder anchor bolt.
3. Remove the outer seat belt retractor.
-
Remove the luggage side lower finisher. See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim
Panel/Service and Repair/Luggage Floor Trim/Removal And Installation.
-
Remove the outer seat belt anchor bolt.
CENTER SEAT BELT RETRACTOR
1. Remove shoulder anchor bolt.
2. Remove center seat belt retractor.
-
Slide rear seat assembly to front most position.
-
Remove luggage side lower finisher LH. See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim
Panel/Service and Repair/Luggage Floor Trim/Removal And Installation.
-
Remove center seat belt retractor mounting bolt.
INSTALLATION
Install in the reverse order of removal.