Cube L4-1.8L (MR18DE) (2010)
Accelerator Pedal Position Sensor: Testing and Inspection
Special Repair Requirement
INSPECTION AND ADJUSTMENT
ACCELERATOR PEDAL RELEASED POSITION LEARNING : Special Repair Requirement
1.START
1. Make sure that accelerator pedal is fully released.
2. Turn ignition switch ON and wait at least 2 seconds.
3. Turn ignition switch OFF and wait at least 10 seconds.
4. Turn ignition switch ON and wait at least 2 seconds.
5. Turn ignition switch OFF and wait at least 10 seconds.
- END