Cube L4-1.8L (MR18DE) (2010)
Alternator: Procedures
ALTERNATOR
Inspection
ALTERNATOR PULLEY INSPECTION
Perform the following.
-
One-way clutch pulley check.
CAUTION:
Be careful not to damage rotor
NOTE:
Secure rotor using suitable tool and a rolled shop towel.
1. Check for locking; (Outer ring is turned clockwise when viewed from front.)
-
If it rotates in both directions, replace pulley.
2. Check for dragging. (Outer ring is turned counterclockwise when viewed from front.)
-
If it locks or unusual resistance is felt, replace pulley.