Cube L4-1.8L (MR18DE) (2010)
Compress coil spring.
4. Install strut mounting bearing and strut mounting insulator with bound bumper to strut.
-
Installation position of strut mounting insulator is shown in the figure.
Arrow Indicates : Vehicle front
5. Secure piston rod tip so that piston rod does not turn, then tighten piston rod lock nut with specified torque.
CAUTION:
Never reuse piston rod lock nut.
6. Gradually release a spring compressor, and remove coil spring.
CAUTION:
Loosen while making sure coil spring attachment position does not move.
7. Remove the strut attachment from strut assembly.
Exploded View
REAR SHOCK ABSORBER
Exploded View
Removal And Installation
REAR SHOCK ABSORBER
Removal and Installation
REMOVAL
1. Remove tires with power tool. See: Wheels and Tires/Service and Repair/Removal and Replacement/Exploded View.