Cube L4-1.8L (MR18DE) (2010)
scale immediately before the clutch is engaged.
Clutch pedal height at clutch disengagement "H2" : See: Specifications/Clutch Pedal
NOTE:
Although the clutch pedal height differs according to whether the clutch gets disengaged or engaged, clutch-engaged case is regarded as
clutch-disengaged case for easier inspection.
7. Replace clutch pedal if the height is outside the reference value.
Clutch Pedal Play
1. Push the pedal pad by hand until a resistance can be felt and check that the play "A" on the upper surface of the pedal pad is within the reference
value.
Clutch pedal height at clutch disengagement "H2" : See: Specifications/Clutch Pedal
2. Replace clutch pedal if the play is outside the reference value.
Position of Clutch Interlock Switch
Check that the clearance "C" between the thread end of clutch interlock switch (1) and stopper rubber (2) is within the specified value while clutch
pedal is fully depressed.
Clearance "C" : See: Specifications/Clutch Pedal
Position of ASCD Clutch Switch (With ASCD)
Check that the clearance "A" between the thread end of ASCD clutch switch (1) and clutch pedal (2) is within the specified value while clutch pedal is
fully released.
Clearance "A" : See: Specifications/Clutch Pedal