Cube L4-1.8L (MR18DE) (2010)
PARTS INFORMATION
CLAIMS INFORMATION
Submit a Primary Failed Part (PP) line claim using the claims coding.
SERVICE PROCEDURE
Remove Control Valve Assembly
PRECAUTIONS WHEN REPLACING CONTROL VALVE ASSEMBLY
Transmissions are vulnerable to particles (dust, metal, lint, etc.)
^
When replacing a valve body, make sure your work environment (shop, workbench, etc.), the transmission area (sub-frame, oil pan, harness
connector, etc.), and your hands are free of contamination.
^
Make sure all parts are clean prior to installing on the vehicle. Unpack Service Parts just before installation.
NOTE:
The transmission does not need to be removed for this procedure.
1. Write down all radio station presets.
2. Set the vehicle on a hoist, but do not raise it.
3. Disconnect both battery cables, negative cable first.