Cube L4-1.8L (MR18DE) (2010)
INSTALLATION
Note the following, and install in the reverse order of removal.
-
When installing control cable (1) to CVT shift selector assembly (2), check that control cable is fully pressed in with the ribbed (A) surface facing
upward.
Arrow Indicates : Vehicle front
-
Refer to the followings when installing the selector lever knob to the CVT shift selector assembly.
- Install the lock pin (1) to the selector lever knob (2).
- Install the knob cover (3) to the selector lever knob.
- Shift selector lever in "N" position.
- Insert the shift lever knob into the shift lever until it clicks.
CAUTION:
-
Install it straight, and never tap or apply any shock to install it.
-
Never press selector button.