D21 Hardbody 2WD V6-2960cc 3.0L SOHC MFI (VG30E) (1991)
/Page-1261004.png)
Grease Contact Areas
2. Apply brake grease to the contact areas shown.
LT30 Assembled View
^
Install all the parts by referring to the images above.
^
Be careful not to damage wheel cylinder piston boots.
^
After installation is completed, adjust shoe-to drum clearance.
Refer to Brake Shoe Adjustments.
Installing Adjuster Cable
TECH TIPS: Place adjuster cable by pulling adjusting lever upward.
