nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Engine Mount > < Engine - Drive Belt Noise Diagnosis|Page 1300

D21 Hardbody 2WD V6-2960cc 3.0L SOHC MFI (VG30E) (1991)

Page 1
background image

Drive Belt: Testing and Inspection

1. Inspect for cracks, fraying, wear or oil adhesion. If necessary, replace with new one.

The belt should not touch the bottom of the pulley groove.

2. Inspect drive belt deflections by pushing on the belt midway between pulleys.

Adjust if belt deflections exceed the limit.
Inspect drive belt deflections when engine is cold. If engine is hot, check deflections in 30 minutes or more.

Engine Mount > < Engine - Drive Belt Noise Diagnosis|Page 1300