D21 Hardbody 4WD V6-2960cc 3.0L SOHC (VG30i) (1986)
Technical Service Bulletin # 90086
Date: 901025
Engine - Block Heater Installation Instructions
Models:
All Models
Section:
Engine Mechanical
Classification:
EM90-007
Bulletin No.:
NT890-086
Date:
October 25, 1990
ENGINE BLOCK HEATER INSTALLATION INSTRUCTIONS
PART NUMBER:
999M4-YA002
APPLICATION:
MODEL
ENGINE TYPE
YEAR
LOCATION
Sentra
SR20DE
1991
Rear side of the engine.
NX 2000
&
Threaded freeze plug on right
later
side of starter motor. (Fig.1)
KIT CONTENTS:
Item No.
Qty.
Item
1
1
Engine block heater assembly
2
1
Gasket
3
1
Power cord
4
1
Power cord end protector cap
5
3
Tie wrap
6
1
Installation Instructions
TOOLS REQUIRED:
Phillips tip screwdriver
24 mm combination wrench
10 mm socket and ratchet
24 mm socket
12 mm Hex bit w/universal joint
Torque wrench
and extension
Cutting pliers
Installation Precautions/Notes:
^
Be careful not to damage engine block threads when removing freeze plug or installing block heater.
^
Handle engine block heater with care to avoid damaging the threads.
^
Do not over-torque engine block heater.
^
Ensure that power cord doesn't contact exhaust pipes, sharp edges or vehicle moving parts.
^
Torque removed vehicle parts to proper specifications.