D21 Hardbody 4WD V6-2960cc 30L SOHC (VG30i) (1986) - Wheel Hub Component Information
Wheel Hub (Locking): Service and Repair
Front axle exploded view-4WD
1.
Place locking hub in free position, raise and support front of vehicle, and remove wheel.
2.
Remove bolts securing locking hub housing, then the housing assembly, Fig. 5.
3.
On models with manual locking hub, remove snap ring from drive axle, then withdraw drive clutch from hub.
4.
On models with automatic locking hub, proceed as follows: