D21 Hardbody 4WD V6-2960cc 3.0L SOHC MFI (VG30E) (1991)
Throttle Valve Cable/Linkage: Adjustments
Fig. 7 Accelerator Cable Adjusting Nut
Fig. 8 Kickdown Switch Adjustment
1.
Adjust accelerator cable as follows:
a. Tighten adjusting nut, Fig. 7, until throttle drum starts to move, then back off 1 1/2-2 turns and secure with locknut.
2.
Adjust kickdown switch as follows:
a. Adjust clearance ``C'', Fig. 8, between stopper rubber and end of kickdown switch thread while depressing accelerator pedal fully.
b. Clearance ``C'', should be .012-.039 inch.