nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Baulk Ring <--> [Synchronizer Ring, M/T]|Specifications|Page 3468 > < Fluid - M/T|Capacity Specifications|Page 3463

D21 Hardbody 4WD V6-2960cc 3.0L SOHC MFI (VG30E) (1991)

Page 1
background image

Baulk Ring: Specifications

Clearance Between Baulk Ring and Gear

1st & 2nd

Standard ...........................................................................................................................................................................  1.05 - 1.3 (0.0413 - 0.0512)
Wear Limit .................................................................................................................................................................................................  0.7 (0.028)

3rd & Main Drive

Standard ...........................................................................................................................................................................  1.05 - 1.3 (0.0413 - 0.0512)
Wear Limit .................................................................................................................................................................................................  0.7 (0.028)

O.D.

Standard ...........................................................................................................................................................................  1.05 - 1.3 (0.0413 - 0.0512)
Wear Limit .................................................................................................................................................................................................  0.7 (0.028)

Reverse Baulk Ring to Reverse Gear Cone

Distance From Edge to Edge

Standard .....................................................................................................................................................................  -0.1 to 0.35 (-0.0039 to 0.0138)
Wear Limit .................................................................................................................................................................................................  0.7 (0.028)

UNIT .........................................................................................................................................................................................................................  mm (in)

Baulk Ring <--> [Synchronizer Ring, M/T]|Specifications|Page 3468 > < Fluid - M/T|Capacity Specifications|Page 3463