nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Sensors and Switches - M/T > < Baulk Ring <--> [Synchronizer Ring, M/T]|Specifications|Page 3468

D21 Hardbody 4WD V6-2960cc 3.0L SOHC MFI (VG30E) (1991)

Page 1
background image

Neutral Switch: Testing and Inspection

Neutral Switch Test

1.

Disconnect the the neutral switch connector.

2.

Connect an ohm meter to switch terminals.

3.

Make certain continuity exists only when the transmission is shifted into neutral.
Replace the switch if it fails the above test.

Sensors and Switches - M/T > < Baulk Ring <--> [Synchronizer Ring, M/T]|Specifications|Page 3468