D21 Hardbody SE King Cab 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
TEMPERATURE CONTROL CABLE
^
When adjusting ventilator door rod and defrost door rod, first disconnect mode control cable from side link. Reconnect and readjust mode control
cable.
^
Move temperature control lever to max. COLD position. Set air mix door lever in full hot mode. Pull on outer cable in direction of arrow and then
clamp it.
^
After positioning temperature control cable, check that it operates properly.
RECIRCULATION CONTROL CABLE