D21 Hardbody SE King Cab 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
![background image](/nissan/d21_hardbody_se_king_cab_4wd/l4-2389cc_2.4l_sohc_mfi_(ka24e)/Page-1702003.png)
Journal
1. Place matching marks on propeller shaft and flange or yoke.
2. Remove snap ring.
3. Remove pushed out journal bearing by lightly tapping yoke with a hammer, taking care not to damage journal and yoke hole.
4. Remove bearing at opposite side in above operation.
-
Put marks on disassembled parts so that they can be reinstalled in their original positions.
ASSEMBLY
Center Bearing
Reverse the disassembly procedure, noting the following:
1. When installing center bearing, position the "F" mark on center bearing toward front of vehicle.
2. Apply a coat of multi-purpose lithium grease containing molybdenum disulfide to the end face of the center bearing and both sides of the
washer.