D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-455002.png)
Page 2
2. Measure outer diameter "Dp" of piston pin.
3. Calculate connecting rod bushing clearance. Connecting rod bushing clearance = C - Dp. The standard value is -0.015 to -0.033 mm (-0.0006 to
-0.0013 inch).
4. If it exceeds the limit, replace the connecting rod assembly or connecting rod bushing and/or piston set with pin.
