D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-458001.png)
Connecting Rod: Testing and Inspection
BEND AND TORSION
The bending limit is 0.15 mm (0.0059 inch) per 100 mm (3.94 inch) length.
The torsional limit is 0.3 mm (0.012 inch) per 100 mm (3.94 inch) length.
If the limits are exceeded, replace the connecting rod assembly.
