D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-479001.png)
Valve Cover: Specifications
1. Install rocker cover. Be sure to avoid interference between rocker cover and rocker arm.
2. Tighten bolts as follows:
a. Temporarily tighten two bolts to 3 Nm (26 inch lbs.) in the order shown.
b. Then tighten remaining bolts to 7 - 11 Nm (61 - 95 inch lbs.) in order shown in figure.
3. Install any parts removed.
