D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
Catalytic Converter: Service and Repair
2WD Models
CAUTION:
-
Replace exhaust gaskets with new ones when reassembling.
If gasket remains on flange surface, scrape off completely as shown at left.
-
With engine running, check all tube connections for exhaust gas leaks, and entire system for unusual noises.
-
Check to ensure that mounting brackets and mounting insulators are installed properly and are free from undue stress. Improper installation could
result in excessive noise or vibration.
-
Discard any heated oxygen sensor dropped from a height of more than 0.5 m (19.7 in) onto a hard surface such as a concrete floor; use a new one.