D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
Page 4
Disc-to-pulley clearance: ............................................................................................................................................... 0.3-0.6 mm (0.012-0.024 in)
If the specified clearance is not obtained, replace adjusting spacer and readjust.
BREAK-IN OPERATION
When replacing compressor clutch assembly, always conduct the break-in operation. This is done by engaging and disengaging the clutch about
thirty times. Break-in operation raises the level of transmitted torque.