D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-2097001.png)
Receiver Dryer: Service and Repair
1. Disconnect battery ground cable and discharge A/C system.
CAUTION: Discharge only into the proper recycling equipment. Do not release refrigerant into the air.
2. Disconnect wiring harness connector to pressure switch.
3. Disconnect refrigerant lines to receiver/drier and plug lines and open fittings.
4. Remove bolts securing bracket and remove receiver/drier.
5. Reverse procedure to install, evacuate and recharge system, and check for leaks.
