D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
Center Mounted Brake Lamp: Customer Interest
Body - Corrosion Near High Mount Stop Lamp
Classification:
BT99-026
Reference:
NTB99-068
Date:
September 20, 1999
1994-97 TRUCK, CORROSION AT HIGH MOUNT STOP LAMP
APPLIED VEHICLE:
1994-97 Truck (D21)
SERVICE INFORMATION
If a 1994-97 Truck exhibits corrosion at the high mount stop lamp (see Figure 1), use the following service procedure to resolve the incident.
1.
Repair the corroded area of the vehicle body using standard auto body repair practices.
2.
Once the body repair is complete, re-install the high mount stop lamp using the new gasket (refer to the Parts Information table for the gasket P/N).
CAUTION:
Only use the gasket specified in the Parts Information table. Do not re-use the old gasket (from the vehicle) and do not use the former P/N gasket as
to prevent new corrosion/damage from occurring.
NOTE:
If the high mount stop lamp was damaged by the corrosion, install a new high mount stop lamp assembly (refer to the Parts Information table for the
stop lamp assembly P/N).
3.
Check the high mount stop lamp for proper operation.
PARTS INFORMATION
DESCRIPTION
PART NUMBER QUANTITY
High Mount Stop Lamp
26590-7B400
1
Gasket, Stop Lamp
26593-3B310
1
CLAIMS INFORMATION