D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
Canister Purge Control Valve: Testing and Inspection
COMPONENT INSPECTION
EVAP Canister Purge Control Valve
Check EVAP canister purge control valve as follows:
1. Plug the port B.
2. Apply pressure [80.0 kPa (600 mmHg, 23.62 inHg, 11.60 psi)] to port A. Then keep it for 15 seconds and check there is no leakage.
3. Repeat step 2 for port C.