D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-2136002.png)
Air Bag Module And Spiral Cable - Removal
CAUTION:
^
Always place air bag module with pad side facing upward.
^
Do not attempt to disassemble air bag module.
^
The special bolts are coated with a bonding agent.
Air Bag Module And Spiral Cable - Removal
^
Do not drop or impact air bag module. Replace air bag module if it has been dropped or sustained an impact.
^
Do not expose the air bag module to temperatures exceeding 90°C (194°F).
^
Do not allow oil, grease or water to contact the air bag module.
Air Bag Module And Spiral Cable - Removal
3. Set steering wheel in the neutral position.
4. Disconnect horn connector and remove steering wheel nut.
5. Remove steering wheel mass damper.
6. Using steering wheel puller, remove steering wheel. Be careful not to overtighten puller bolt on steering wheel.
CAUTION: Do not tap or bump the steering wheel.
7. Remove steering column cover.
8. Disconnect air bag harness and main harness connectors.
