D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
Throttle Position Sensor/Switch: Testing and Inspection
COMPONENT INSPECTION
Closed Throttle Position Switch
1. Start engine and warm it up sufficiently.
2. Turn ignition switch "OFF".
3
Disconnect throttle position switch harness connector.
4. Check continuity between terminals 5 and 6 while opening throttle valve manually.
Throttle valve conditions / Continuity
Completely closed / Yes
Partially open or completely open / No
If NG, replace throttle position switch.