D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-1942001.png)
Alignment: Service and Repair
Steering Angle
1. Set wheels in straight-ahead position. Then move vehicle forward until front wheels rest properly on turning radius gauge.
2. Rotate steering wheel all the way right and left; measure turning angle.
On power steering models, turn steering wheel to full lock and apply force (at circumference of steering wheel) of 98 - 147 N (22 - 33 lbs.) with
engine at idle.
CAUTION: Do not hold the steering wheel at full lock for more than 15 seconds.
3. Adjust stopper bolt if necessary. Standard length "L2": 26.5 mm (1.043 inch).
4. Wheel turning angle (Full turn): See: Specifications
