D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-1959003.png)
4. When installing boot band with commercial service tool, be careful not to overexpand it.
CAUTION: Be careful not to apply grease or oil to taper of joint.
Idler Arm Assembly
^
Check rubber bushing of idler arm for breakage, wear or play, and if necessary replace.
^
Lubricate idler arm assembly with multi-purpose grease, if necessary.
Cross Rod And Tie-Rod
^
Check tie rod and cross rod for breakage, bends or cracks, and replace with a new one if necessary.
Steering Damper
^
Check for oil leaking from damper, and replace if necessary.
Fixing Location
^
Check fixing location (nuts and cotter pins) for looseness, play or breakage. . When looseness or play is found, check for wear on tapered
portion of joints, gear arm of idler arm.
^
When reassembling each joint, use new cotter pins.
