D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-2012001.png)
Suspension Strut / Shock Absorber: Service and Repair
Front
REPLACEMENT
^
When removing and installing shock absorber, do not allow oil or grease to contact rubber parts.
INSPECTION
^
Except for nonmetallic parts, clean all parts with suitable solvent and dry with compressed air.
^
Use compressed air to blow dirt and dust off of nonmetallic parts.
^
Check for oil leakage and cracks. Replace if necessary.
^
Check piston rod for cracks, deformation and other damage. Replace if necessary.
^
Check rubber parts for wear, cracks, damage and deformation. Replace if necessary.
