D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
Wheel Bearing: Service and Repair
Overhaul
DISASSEMBLY
^
Remove bearing outer races with suitable brass bar.
INSPECTION
General
^
Thoroughly clean wheel bearings and wheel hub.
Wheel Bearings
^
Make sure wheel bearings roll freely and are free from noise, cracks, pitting and wear.
Wheel Hub
^
Check wheel hub for cracks by using a magnetic exploration or dyeing test.
ASSEMBLY
1. Install bearing outer race with Tool until it seats in hub.
2. Pack multi-purpose grease in wheel hub and hub cap.
3. Apply multi-purpose grease to each bearing cone.