D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
-
Inspection of forward clutch drive plates.
Thickness of drive plate:
Standard: 1.52 - 1.67 mm (0.0598 - 0.0657 inch)
Wear limit: 1.40 mm (0.0551 inch)
-
Inspection of overrun clutch drive plates.
Thickness of drive plate:
Standard: 1.90 - 2.05 mm (0.0748 - 0.0807 inch)
Wear limit: 1.80 mm (0.0709 inch)
-
Installation of forward clutch piston and overrun clutch piston.
1. Install forward clutch piston by turning it slowly and evenly.
-
Apply ATF to inner surface of clutch drum.
-
Align notch in forward clutch piston with groove in forward clutch drum.
2. Install overrun clutch by turning it slowly and evenly.
-
Apply ATF to inner surface of forward clutch piston.