D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
Page 22
Wear limit: 1.80 mm (0.0709 inch)
Reverse Clutch Dish Plate
-
Check for deformation or damage.
Reverse Clutch Piston
-
Shake piston to assure that balls are not seized.
-
Apply compressed air to check ball oil hole opposite the return spring to assure that there is no air leakage.
-
Also apply compressed air to oil hole on return spring side to assure that air leaks past ball.
ASSEMBLY
1. Install D-ring and oil seal on piston.
-
Apply ATF to both parts.
2. Install piston assembly by turning it slowly and evenly.
-
Apply ATF to inner surface of drum.
3. Install return springs and spring retainer.