D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-1532003.png)
Page 3
Wear Limit ................................................................................................................................................................................... 2.0 mm (0.079 inch)
GENERAL
Number Of Drive Plates ................................................................................................................................................................................................... 3
Number Of Driven Plates ................................................................................................................................................................................................. 5
Reverse Clutch and Drum
DIMENSIONS
Drive Plate Thickness:
Standard Value ................................................................................................................................................ 1.90 - 2.05 mm (0.0748 - 0.0807 inch)
Wear Limit ............................................................................................................................................................................... 1.80 mm (0.0709 inch)
End Play [1] .......................................................................................................................................................... 0.55 - 0.90 mm (0.0217 - 0.0354 inch)
Retaining Plate And Snap Ring Clearance:
Standard .................................................................................................................................................................. 0.5 - 0.8 mm (0.020 - 0.031 inch)
Wear Limit ................................................................................................................................................................................... 1.2 mm (0.047 inch)
GENERAL
Number Of Drive Plates ................................................................................................................................................................................................... 2
