D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
2. Install cam ring in oil pump housing by the following steps.
a. Install side seal on control piston.
-
Pay attention to its direction-Black surface goes toward control piston.
-
Apply petroleum jelly to side seal.
b. Install control piston on oil pump.
c. Install O-ring and friction ring on cam ring.
-
Apply petroleum jelly to O-ring.
d. Assemble cam ring, cam ring return spring and spring seat. Install spring by pushing it against pump housing.
e. While pushing on cam ring install pivot pin.