D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
Center Bearing
1. Place matching marks on flanges, then separate 2nd tube from 1st tube.
2. Place matching marks on the flange and shaft.
3. Remove locking nut using Tool numbers:
Front: ST38060002 (J134311)
Rear: KV38104700 (J34311)
4. Remove companion flange using puller.
5. Remove center bearing using Tool number ST30031000 (J22912-01) and press.