D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
3. Stake the nut. Always use new one.
4. Align match marks when assembling tubes.
Journal
1. Assemble journal bearing. Apply recommended multi-purpose grease on bearing inner surface.
-
When assembling, be careful that needle bearing does not fall down.
2. Select snap ring that will provide specified play in axial direction of journal, and install them. Refer to the illustration for the available snap
rings.
-
Select snap rings with a difference in thickness at both sides within 0.06 mm (0.0024 inch).