D21 Hardbody XE 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
Axle Shaft: Service and Repair
Replacement
REMOVAL
1. Remove bolts fixing drive shaft to final drive.
2. Remove free-running hub assembly with brake pedal depressed.
3. Remove brake caliper assembly without disconnecting brake hydraulic line.
CAUTION: Be careful not to depress brake pedal, or piston will pop out. Make sure that the brake hose is not twisted.
4. Remove tie rod ball joint. Refer to Steering Knuckle.
5. Remove nuts fixing lower ball joint on lower link.
CAUTION: Support lower link with jack.
6. Remove upper ball joint fixing bolt.
7. Remove shock absorber lower bolt.