D21 Hardbody XE King Cab 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
Brake Rotor/Disc: Testing and Inspection
RUNOUT
^
Ensure that no wheel bearing axial end play exists.
^
With rotor mounted on vehicle, check runout using a dial indicator. Maximum runout is 0.07 mm (0.0028 inches).
^
If the runout is out of specification, turn rotor with on-car brake lathe (MAD, DL-8700, AMMCO 700 and 705, or equivalent).
THICKNESS
^
Maximum thickness variation measured from at least 8 positions is 0.02 mm (0.0008 inches.)
^
If thickness variation exceeds the specification, machine rotor with on-car brake lathe.
^
The rotor repair limit is 24.0 mm (0.945 inches).