D21 Hardbody XE King Cab 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-1831001.png)
Brake Master Cylinder: Service and Repair
CAUTION:
^
Be careful not to splash brake fluid on painted areas; it may cause paint damage. If brake fluid is splashed on painted areas, wash it away with
water immediately.
^
In the case of brake fluid leakage from the master cylinder, disassemble the cylinder. Then check piston cups for deformation or scratches and
replace necessary parts.
^
Refill with new "DOT 3" brake fluid.
^
Never reuse drained brake fluid.
Master Cylinder Assembly
REMOVAL
1. Connect a vinyl tube to air bleeder valve.
2. Drain brake fluid from each air bleeder valve, depressing brake pedal to empty fluid from master cylinder.
3. Remove brake pipe flare nuts.
4. Remove master cylinder mounting nuts.
Bending Claws Of Stopper Cap