D21 Hardbody XE King Cab 4WD L4-2389cc 2.4L SOHC MFI (KA24E) (1997)
/Page-1664002.png)
8. Remove drive shaft with knuckle.
CAUTION: Cover drive shaft boot with a suitable protector.
9. Separate drive shaft from knuckle by slightly tapping it.
INSTALLATION
1. Apply multi-purpose grease.
2. Install bearing spacer onto drive shaft. Make sure that the bearing spacer is facing in the proper direction.
3. After installing wheel hub and wheel bearing, adjust wheel bearing preload. See: Steering and Suspension/Suspension