Frontier 2WD L4-2.5L (QR25DE) (2005)
Impact Sensor: Service and Repair
Satellite Sensor
SIDE AIR BAG (SATELLITE) SENSOR
Removal and Installation
REMOVAL
CAUTION:
-
Before servicing the SRS, turn the ignition switch off, disconnect both battery cables and wait at least 3 minutes.
1. Remove front door sill finisher and lift carpet.
2. Remove side air bag (satellite) sensor bolts and release the clip.
3. Disconnect the side air bag (satellite) sensor connector.
CAUTION:
-
Do not use old bolts after removal; replace with new bolts.
-
Check side air bag (satellite) sensor to ensure it is free of deformities, dents, cracks or rust. If it shows any visible signs of damage, replace it with
new one.
-
Do not disassemble side air bag (satellite) sensor.
-
Replace side air bag (satellite) sensor if it has been dropped or sustained an impact.
INSTALLATION
Installation is in the reverse order of removal.
-
After the work is completed, perform self-diagnosis to check that no malfunction is detected. Refer to SRS-22, "SRS Operation Check". See:
Testing and Inspection/Component Tests and General Diagnostics