Frontier 2WD V6-3.3L (VG33E) (2003)
Fast Idle Cam: Adjustments
Fast Idle Cam (FIC) Inspection and Adjustment
OPERATION PROCEDURE
With CONSULT-II
1. Turn ignition switch ON.
2. See COOLAN TEMP/S in DATA MONITOR mode with CONSULT-II.
3. When engine coolant temperature is 20 to 30 °C (68 to 86 °F), make sure that the center of mark A is aligned with mark B as shown in the figure.
-
If NG, adjust by turning adjusting screw.
Lock nut
Tightening Torque: 0.98 - 1.96 N.m (10 - 20 kg-cm, 8.7 - 17.4 in-lb)
4. Start engine and warm it up.
5. When engine coolant temperature is 75 to 85 °C (167 to 185 °F), check the following.
-
The center of mark A is aligned with mark C .
-
The cam follower lever's roller is not touching the fast idle cam.
-
If NG, replace thermo-element and perform the inspection and adjustment again.
With GST
1. Turn ignition switch ON.