Frontier SC Crew Cab 2WD V6-3.3L SC (VG33ER) (2002)
Transmission Position Switch/Sensor: Adjustments
Park/Neutral Position (PNP) Switch Adjustment
1. Remove manual control linkage from manual shaft of A/T assembly.
2. Set manual shaft of A/T assembly in N position.
3. Loosen PNP switch fixing bolts.
4. Insert pin into adjustment holes in both PNP switch and manual shaft of A/T assembly as near vertical as possible.
5. Reinstall any part removed.
6. Check continuity of PNP switch.