Frontier SC King Cab 4WD V6-3.3L SC (VG33ER) (2001)
Loading Procedure
NOTE:
-
The CONSULT-II must be used in conjunction with a program card. CONSULT-II does not require loading (Initialization) procedure.
-
Be sure the CONSULT-II is turned off before installing or removing a program card.
CONSULT-II Data Link Connector (DLC) Circuit
INSPECTION PROCEDURE
If the CONSULT-II cannot diagnose the system properly check the following items.
NOTE: The DDL1 and DDL2 circuits from DLC pins 12, 13,14 and 15 may be connected to more than one system. A short in a DDL circuit connected
to a control unit in one system may affect CONSULT-II access to other systems.
How to Check Terminals
Connector and Terminal Pin Kit
Use the connector and terminal pin kit listed below when replacing connectors or terminals.
The connector and terminal pin kit contains some of the most commonly used NISSAN connectors and terminals.
How to Probe Connectors