Frontier SC King Cab 4WD V6-3.3L SC (VG33ER) (2001)
![background image](/nissan/frontier_sc_king_cab_4wd/v6-3.3l_sc_(vg33er)/Page-1334009.png)
6.
Remove the axle shaft and brake backing plate assembly from the housing (see Figure B4).
^
The axle shaft will have gear oil on it.
^
Wipe the gear oil off of the axle shaft.
^
Do not wipe the gear oil into the axle housing or axle bearing.
7.
Remove the old axle shaft seal from the axle housing as follows:
A.
Insert the legs of the Seal Remover # J-26941 into the center of the axle shaft seal and tighten the thumb screw until the legs fully contact the
inner metal "ring" portion of the seal (see Figure B5).