Frontier SC King Cab 4WD V6-3.3L SC (VG33ER) (2001)
![background image](/nissan/frontier_sc_king_cab_4wd/v6-3.3l_sc_(vg33er)/Page-1334013.png)
2.
Apply a coat of suitable grease on the new 0-ring. Then install the 0-ring on the axle housing (see Figure D2).
3.
Insert the "Axle Installation Seal Protector" special tool # J-34296-1 into the new axle shaft seal.
^
Make sure the split ends of the protector butt up to each other and do not overlap (see Figure D3).
^
Leave the protector in place during axle installation to protect the grease seal.
4.
Re-install the axle shaft assembly (see Figure D4) making sure:
^
The axle shaft does not damage the new grease seal.