Frontier SC King Cab 4WD V6-3.3L SC (VG33ER) (2001)
19.
Slide the Sleeve # J-25852-4 over the Bearing Puller Jaws (see Figure E17).
20.
Tighten the Forcing Screw of the Extension Tube until the outer axle bearing is pulled free (see Figure E18).
IMPORTANT:
Do not use an impact wrench to tighten the forcing screw.
21.
Remove the Sleeve, Bearing Puller Jaws Extension Tube, and outer bearing from the axle shaft.
22.
Finally, remove the outer grease seal from the axle shaft (see Figure E19).