Frontier SC King Cab 4WD V6-3.3L SC (VG33ER) (2001)
13.
Then, slide the Sleeve # J-25852-4 over the Bearing Puller Jaws (see Figure E12).
14.
Screw the special nuts onto the backing plate studs (see Figure E13).
^
The special nuts are supplied in kit # J-46215-4)
^
Screw the nuts all the way down.
15.
Tighten the Forcing Screw of the Extension Tube until the brake backing plate (with inner wheel bearing) is pulled free (see Figure E14).