nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Body and Frame > < Tow Truck Towing|Page 12160
Page 1
background image

Towing Information: Service and Repair
4WD Models

NISSAN recommends that a dolly be used as illustrated when towing 4-wheel drive models.

-

When towing with the front wheels on the ground or rear wheels on the ground (If you do not use towing dollies):
Set the free-running hubs to the free position and move the transfer case shift lever into the "2H" position.

-

When towing with the front on the ground: Turn the ignition key to the OFF position and secure the steering wheel in a straight ahead position
with a rope or similar device. Never place the ignition key in the LOCK position. This will result in damage to the steering lock mechanism.

-

When towing manual transmission models with the rear wheels on the ground:
Always release the parking brake and move the transmission shift lever to the neutral position.

Observe the following restricted towing speeds and distances.
Speed: Below 95 kph (60 MPH)

Distance: Less than 800 km (500 miles)

If the speed or distance must necessarily be greater, remove the propeller shaft before hand to prevent damage to the transmission.

Body and Frame > < Tow Truck Towing|Page 12160